Iruxil W Lasur

Water-based wood protective stain. Decorative use for both indoor and outdoor environments. It acts as both a primer and finish, providing the desired protection and color to the wood from the first application. With UV protection against solar damage, preventing premature aging or damage to the wood. It also contains fungicidal and insecticidal agents to provide biological protection against woodworm and blue fungi.

Certifications

EN 46-1 Determination of preventive efficacy against woodworm of the Hylotrupes bajulus genus).

EN 152 Determination of preventive efficacy of a wood protection treatment against blue stain. Brush treatment)

Registered at the European level with authorization number ES/APPF(NA)-2023-08-00887-1-1.

Sizes

• 250 ml
• 750 ml
• 4 L
• 20 L

Units

• 8u.
• 6u.
• 2u.
• –

Notable Features

Easy maintenance.

Establishes a barrier that waterproofs the wood.

Excellent adhesion to all types of wood (including tropical and coniferous woods).

 

*The maximum observed resistance depends on the type of wood and its orientation.

Application Data

Colour Chart

• 490 Clear
• 410 Pine
• 420 Teak
• 810 Oregon Pine
• 430 Oak
• 440 Chestnut
• 450 Walnut
• 460 Dark Walnut
• 470 Mahogany
• 480 Ebony
• 491 White
• 492 Blue
• 493 Red
• 496 Dark Green
• 498 Dark Grey

Finish

The Clear option is available in matt, satin and gloss finishes and is recommended for indoor use.
All other colors are available in matt and satin finishes.

Substrate and preparation

Applicable to all types of wood. However, for outdoor applications, it is advisable to avoid using woods of questionable durability. The wood must be free of dust and dirt and devoid of any varnish or paint layer to facilitate good penetration and adhesion of the product to the substrate. Do not apply to woods containing more than 15% moisture.

Application

The product is ready for use. Shake well to ensure uniform color. Apply 2 coats of 80-100 g/m². For a better finish, apply in the direction of the wood grain. Lightly sand between coats at intervals of 1-2 hours, avoiding application in cold and humid environments. If necessary, dilute with water.

Maintenance

If signs of degradation appear over time, simply sand the affected surface gently and apply 1-2 coats of the product.